The demand for enhanced laptop performance is ever-increasing. Whether you’re a professional multitasker, a gaming enthusiast, or a casual user, there comes a time when you may want to upgrade your laptop parts. In this case, we’re focusing on the HP 15s-FQ2084ns from the 15s FQ series. This guide will walk you through how to disassemble your laptop to perform three main upgrades:
- Upgrade the Memory/RAM
- Replace the Battery
- Change the SSD
Preparation Steps
Tools Needed
- Small Phillips Screwdriver
- Plastic Spudger
- Anti-static Wrist Strap (optional but recommended)
Safety Measures
- Backup all critical data
- Unplug all external devices and the power cord
- Ground yourself to discharge static electricity
Step-by-Step Instructions
1. Removing the Back Cover
First things first, turn off the laptop and flip it over to access the back panel. Unscrew the designated screws keeping the back cover in place. These screws are generally recessed into the casing, so they’re easy to spot. Use your plastic spudger to carefully pry off the back cover, starting from one edge and moving around the perimeter.
2. RAM/Memory Upgrade
Once the back cover is off, you should be able to see the RAM modules. These are typically located in small bays that are either stacked or side by side.
- Removal: Release the small clips that hold the RAM in place. The RAM should pop up at an angle.
- Installation: Align the new RAM module with the slot and gently insert it at the same angle. Push down until the clips click into place.
3. Battery Replacement
The battery is usually clearly visible and is the largest component inside the laptop.
- Removal: Disconnect the battery connector from the motherboard. Unscrew any screws securing the battery in place and gently lift it out.
- Installation: Place the new battery in, reconnect the battery connector, and screw it into place.
4. SSD Replacement
The SSD is typically located near the RAM and is smaller in size.
- Removal: Locate and unscrew the single or multiple screws holding the SSD in place. Slide it out of its slot.
- Installation: Slide in the new SSD, aligning it properly in the slot, and secure it with the screws.
5. Reassembling the Laptop
Carefully align the back cover with the laptop and snap it back into place. Screw it in using the screws you initially removed.
VIDEO:
Upgrading these essential laptop parts in your HP 15s-FQ2084ns can give you a significant performance boost. You can revel in quicker load times, more fluid multitasking, and extended battery life. Doing it yourself not only saves money but also extends the lifecycle of your laptop, making it a win-win situation.
If you encounter issues at any point, consult the manufacturer’s manual or seek professional assistance. Remember, while DIY upgrades are fulfilling, it’s essential to be cautious to avoid damaging sensitive components.
So go ahead, arm yourself with this guide and the right tools, and give your HP 15s-FQ2084ns the boost it deserves.
About Author
